PRODUCTS & EQUIPMENT | Inserts & Anchors
Mixing Products
ADMIXTURES
Power Tools
Cold Weather Items
BONDING & PATCHING
Curb & Gutter, Flatwork Forms, Stakes, & Screeds
Curing, Sealing & Protection
DECORATIVE & ARCHITECTURAL CONCRETE
EQUIPMENT
Forming
HAND TOOLS & ACCESSORIES
Inserts & Anchors
JOINTS & CRACKS
MASONRY COATINGS
MISCELLANEOUS
Rebar Fabrication
Safety Protection
TESTING
TILT-UP
UDOT APPROVED
Vapor Barrier
Intermountain Concrete Specialties carries concrete inserts, anchors and accessories from industry-leading brands, including Dayton Superior, Meadow Burke and EMI. And we have the expertise, service and support hard-working pros and do-it-yourselfers need to help get the job done on schedule.
We know there’s nothing more important than safety on the job. The products we carry are trusted and used worldwide—from the smallest homes to the largest skyscrapers. You can count on the inserts and anchors we carry to do their job, so you and your crew can keep doing yours.
And with seven locations, from Idaho Falls to St. George, the service and support you count on to get the job done is never far away. Contact us today.
Pre-Cast
The keyword for pre-cast is safety. Our inserts and anchors are tested and re-tested to ensure quality performance. Made from the highest quality materials, your job will be done right. Visit our manufacturer’s website for more details:
Simpson Strongtie Titen HD Screw Anchor
A high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD offers low installation torque and outstanding performance. The Titen HD screw anchor is designed for a wide variety of applications such as sill plates, ledgers, post bases, seating, and other holdown applications. The screw anchor is easy to remove when used in temporary applications such as bracing and formwork, or when a fixture needs to be relocated.
Key Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Use in dry interior environments only
Stock Sizes – All Locations
TITEN HD 1/4″ X 1-7/8″ Zinc Plated / Carbon Steel
TITEN HD 1/4″ X 3″ Zinc Plated / Carbon Steel
TITEN HD 1/4″ X 4″ Zinc Plated / Carbon Steel
TITEN HD 3/8″ X 3″ Zinc Plated / Carbon Steel
TITEN HD 3/8″ X 4″ Zinc Plated / Carbon Steel
TITEN HD 3/8″ X 5″ Zinc Plated / Carbon Steel
TITEN HD 3/8″ X 6″ Zinc Plated / Carbon Steel
TITEN HD 1/2″ X 3″ Zinc Plated / Carbon Steel
TITEN HD 1/2″ X 4″ Zinc Plated / Carbon Steel
TITEN HD 1/2″ X 5″ Zinc Plated / Carbon Steel
TITEN HD 1/2″ X 6″ Zinc Plated / Carbon Steel
TITEN HD 5/8″ X 5″ Zinc Plated / Carbon Steel
TITEN HD 3/4″ X 5″ Zinc Plated / Carbon Steel
TITEN HD 3/4″ X 7″ Zinc Plated / Carbon Steel
TITEN HD 3/4″ X 10″ Zinc Plated / Carbon Steel
Visit our manufacturer websites for more details:
Simpson Strongtie